Ant40 – All in One 40 Antminers Hydro Cabinet
Can house
40 S19 / S21 / S23 Hydro Miners
Total Capacity
MAX 500A
Cooling Fan
230KW
OVERVIEW
| Item | Spec |
| System Size (Operating) | 2500 × 1200 × 2640 mm |
| Shipping configuration | Fan module (separate shipment)
Main cabinet
|
| Miner capacity | 40 units |
| Compatible miners | S19 / S21 / S23 Hydro |
| Cooling capacity | 230kW |
| Fans | 2 × 4kW |
| Pump system | 1 main + 1 refill |
| Tubing | 80× FEP hoses |
| Power input | 630A MCCB |
| Control | 7-inch HMI |
| Protection | NEMA 4 |
| Wiring | TN-S system |
- Plug & Play Deployment
On-site only need:
Electricity
Water(for first)
Hydro miners
- Stable 230kW Cooling Capacity
Designed for heat loads specific to. S19/S21/S23 Hydro miner
- Fully Automatic Operation
Auto liquid refill
Auto temperature control
Auto fan speed adjustment
Auto pressure relief
- Low OPEX Design
No cooling tower required
No water evaporation system
Minimal maintenance
Fan module is shipped separately due to height limit
Operating temperature
- 10°C to 35°C Best
- Not suitable for extreme heat / dust / storm environments
Site Requirements
- Floor load ≥ 1000 kg/m²
- Flat and stable ground
- No vibration source
- Clean air environment preferred
Clearance requirements
- Side clearance: 2–3 meters
- Top clearance: ≥5 meters
- No obstruction above dry cooler exhaust
Optional Upgrades
A1 – Air Filter
Metal mesh – durable, lowest cost, low filtration
PU foam – washable, balanced, cheap
MERV 8 – best filtration, highest cost
A2｜Sunshade Roof
Modular triangular roof extending 1.5 m on both intake and exhaust sides for insulation and weather protection.
A3｜Adjustable Blinds
Aluminum alloy adjustable blinds covering up to 90% of the intake side to optimize airflow direction.
A4｜Hot & Cold Isolation
Thermal isolation system preventing hot air recirculation and improving cooling efficiency.
A5｜Internal Ceiling
Creates a flat top and stable hot-air return path, eliminating airflow short-circuiting.
A6｜Stronger Fan
High-efficiency EC direct-drive fan with higher airflow and factory pre-installation.
A7 – Expandable Sliding Aisle (Drawer-Type)
Drawer-style expandable structure that allows the cold aisle or hot aisle to be widened as needed.The aisle width can be expanded up to 2.5 meters (≈ 8.2 ft), improving airflow organization and cooling efficiency.
A8 – Integrated support shed
The integrated support canopy can block sunlight and rain and snow, resist wind and rain, extend the service life of the water curtain, and the hinge structure design can be closed directly.
